Products Foldable intraocular lens PMMA iols Viscoelastics Phacoemulsification system Intra-stromal inlays CTRs Sutures Instruments Sterilizers Economy Links Search
PHACOEMULSIFICATION SYSTEM - STANDARD CONSOLE
Eye4Vision Int'l.
®
Phacoemulsification system
|
Phaco System Standard Console Phaco System Cold Phaco Console
|
►
Mode and Display
U/S POWER
♦ Sets Maximun U/S Power
♦ 40 Khz./ 50 Watts Max.
♦ 0-100% Range
♦ 10 Pulses / Sec. ( U/S PULSE )
U/S VACUUM
♦ Sets Maximum Vacuum
♦ ( U/S and U/S PULSE Modes Only )
♦ 0-200 mmHg Range ( Default )
♦ 0-500 mmHg Range* Selection
I/A VACUUM
♦ Sets Maximum Vacuum
♦ ( I/A and VITRECTOMY Modes Only )
♦ 0-500 mmHg. Range
CAUTERY POWER
♦ Sets Cautery Power
♦ 10 Watts Maximum / 1Mhz.
♦ 0-100% Range
CUT RATE
♦ Sets Vitrector Cut Rate
♦ 100-600 Cuts / MIN Range
♦ Single-Cut ( S ) Capability
ASPIRATION RATE
♦ Sets Max. Peristaltic Pump Rate
♦ 10-40cc./ MIN Range
♦ 5-20cc./ MIN Range
♦ ( VITRECTOMY Mode Only )
MODE SELECT
♦ Sets Mode
♦ Scrolls UP to next
♦ Mode on UP
♦ Switch Actuation
♦ Scrolls DOWN to next
♦ Mode on DOWN.
♦ Switch Actuation
bottom console
ON
( 500 mmHg )
MODE / DISPLAY - Standard Console
U/S Time Display / Reset
♦
♦
Only enabled in U/S and U/S PULSE Modes
Monitors cumulative time
( 0.0 - 9.9 minutes ) when
U/S power is delivered
MODES
Standard Console
U/S - Ultrasonic
I/A - Irrigation / Aspiration