During the past few years there have been tremendous developments in ophthalmic,
dental and surgical technology. It is not surprising that sterilizing technology has
finally caught with the needs of modern surgery.
STATIM S-CYCLE CASSETTE STERILIZERS
STATIM S-sycle, unique patented technology.
Positive Pressure Pulse Displacement actively removes air from
the chamber to create a “Positive Pressure Pulse Pre-vacuum”.
The STATIM sterilizers fully comply with:
● European Standard EN 13060
● Australian / New Zealand AS/NZS 4815
● FDA for sale in the USA
CLASS 'S' cycle
► Positive Pressure Pulse Vacuum ( Active Air Removal )
For sterilizing specifically defined loads including hollow phaco handpieces,
wrapped and porous loads.
100% biologically accurate every cycle.
Independent microbiological research shows that sterilization is achieved in half a cycle.
These research papers are available upon request
The STATIM cassette autoclave uses clean “good quality distilled water every cycle and research
shows that there is no detectable endotoxins in the water reservoir of the STATIM.
Re-cycling dirty contaminated water is certainly no longer acceptable and the reservoir holds
sufficient water for 30 cycles
● Sterility assurance
The STATIM 'S' Cycle validates its own successful cycle as a computerized microprocessor abort
the cycle if either the parameters of temperature or time are not achieved.
Daily validation can be done in the wrapped cycle with a “Super Atmospheric Pressure” Helix.
Tracking is easy and accurate with “POINT OF CARE” sterilization between patients,
the validation printout can be attached to the patient card to prove sterility for every patient.
It is extremely user friendly as it works with the touch of a button on a Key Pad and a display
tells the operator exactly what to do.
The STATIM S-cycle cassette autoclave is a bespoke sterilizer in that it is
validated micro-biologically by independent research institutes and tested for
specific instruments. These include all major brands of handpieces.
STATIM2000 / 5000 S-Cycle Autoclaves - New Technology in medical sterilization
Now you can also obtain daily validation of STATIM’s sterilization cycle with a specifically designed
Process Challenge Device – StatimHelix that makes STATIM an S-Class autoclave that can prove
its effectiveness by both biological and mechanical means.
And with daily validation, you can be certain that STATIM is meeting the challenge of ensuring that yourself,
your staff and your patients are protected against cross-infection from contaminated instruments.
1. Unwrapped cycle
2. Wrapped cycle
3. Delicate cycle
4. Heavy duty cycle
5. Drying cycle
HEAVY DUTY ( unwrapped )
Dri-Tec Drying Technology
( Dri-TecC )
( Dri-TecR )
- unwrapped instruments between patients for immediate use
- wrapped instruments that need to be stored in bags
- delicate items ( rubber / plastic )
- large loads ( unwrapped )
- drying wrapped bags or instruments left inside the cassette
The STATIM5000S has 5 Cycles
DRI-TEC DRYING TECHNOLOGY
The STATIM2000, 5000 ( and 7000 ) Cassette Autoclaves have each been designed to provide you
with a complete solution of Rapid sterilization balanced by Rapid drying.
STATIM2000S using DrI-TecC convection heat drying technology,
drying wrapped instrument loads in as little as 10 minutes.
STATIM5000S using DrI-TecR radiant heat drying technology,
drying a full load in as little as 15 minutes
Rapid balanced drying is provided by STATIMs DRI-TEC DRYING TECHNOLOGY
STATIM2000S and STATIM5000S S-Cycle autoclaves